Technical Data

Product No.:




InvisiGARD® Headlight Protection is a 6 mil (150 micron) non-yellowing urethane film coated with an aggressive removable acrylic adhesive system. This adhesive system is designed to remove without adhesive transfer and/or damage to the applied surface. 


Protection of automotive headlamps, turn signals and fog lamps against chipping, breakage and deterioration due to stone and pebbles, bug and environmental damage, and abrasion. Due to the clarity and high gloss finish of this product, InvisiGARD® does not alter the aesthetics of the applied surface.










Adhesive thickness:

2.0 mils (0.0020")

0.0508 mm

Substrate Thickness:

6.0 mils (0.0060”)

0.1524 mm




Peel Adhesion (PSTC-1):

25.0 oz/inch

16.3 N/2.5 cm




Shear Adhesion (PSTC-7):

Indefinite @ 2.2 psi

Indefinite @ 15.2 kPa




Tensile (PSTC-31):

54 lbs/inch width

244 N/2.5 cm










Maximum continuous use Temperature:




Minimum application Temperature:








Release Liner:

90 lbs/ream

148 GSM


Polycoated bleached kraft


'Click' Here for Test Data

InvisiGARD® Independent Testing Laboratory Data

The information listed is in good faith and has been established from sources believed to be secure and reliable.  The values listed are typical properties and are not intended to be used as specifications for defined applications.  User must determine the product suitability for the end use application and assume all risks and liabilities.
'Click' here for a printable (.pdf) version: InvisiGARD® Headlight Protection Technical Data
Need to contact us? Simply email us at
Copyright © 2017 [Auto Trim DESIGN®]. All rights reserved. InvisiGARD® is a registered trademark of Auto Trim DESIGN® of Northeast Wisconsin, Inc.